Can Tub Be Wet When Resurfacing?
If you have resurfaced your tub, you will need to know a few things about the process. You will need to know how to prepare the tub and what to do while it is wet. It is also essential to understand the cure time, cleaning, and maintenance of the new surface. Here is a list of some tips and tricks that will help you do it correctly. Before you start, make sure that you follow all the instructions.
(Searching in Google “countertop repair near me“? Contact us today!)
resurfacing a bathtub
One of the first steps in resurfacing a bathtub is to clean it thoroughly. Once you’ve done that, you can start the process of applying the new coating. You should make sure that it’s as smooth as possible. If the surface feels rough, you’ll need to sand it down. You can do this by wetting it down with 800 to 1000-grit sandpaper or 1500-grit sandpaper depending on the thickness of the surface. It’s also vital that you have the correct mix ratio.
Preparation
Before you hire a professional to resurface your bathtub, it is important to prepare it for the job. You must remove the toilet and any vanity cabinets. If you have a water pipe or vanity that has to be removed, it is a good idea to install a water-cutoff valve before removing it. It is also a good idea to turn off the water to the tub to prevent fumes from coming through the pipes. Also, you need to remove the old finish from the tub before applying a new coat.
Cure time
If you’re planning to have your tub resurfaced, you should be aware of the curing time. The refinishing process takes at least twenty-four hours, but in some cases, it may take up to 72 hours. After the bathtub has been resurfaced, you can use it, but you mustn’t disturb it during the curing process. Before you start the tub resurfacing process, it is important to make sure that the tub is at least sixty-two degrees Fahrenheit.
Cleaning
Can bathtub resurfacing be performed in the wet state? Yes, it can. However, you should avoid placing metal objects directly on the resurfaced tub. These items can leave rust stains or color bleeding. Check the warranty information for the tub for more information. It is also important to avoid setting wet garments over the resurfaced tub. The following tips can help you get a good finish.
Common problems
After the wet tub resurfacing, your bathtub should feel smooth to the touch. If you find it too rough to touch, there are two main reasons: improper cleaning or sanding. A non-slip finish is preferred for the basin of the tub, and a textured finish is not recommended. One of the most common causes of rough texture is dust getting caught between the coatings. The best way to avoid this problem is to thoroughly clean the surface before resurfacing.
Cost
If you are planning on resurfacing your wet bathtub, it is crucial to get at least three estimates from different service providers. This will give you an idea of the kind of service to expect, as well as the price. Some companies will even offer warranties, but this will depend on the company and the type of tub. Before deciding on a resurfacing company, be sure to read reviews and check their references.